When was the last time you serviced your room heater? If you’re like most people, probably never! We often plug in our heaters as soon as the chill sets in, expecting them to work perfectly without a second thought. But just like your air conditioner or refrigerator, room heaters also need regular maintenance to perform their best and last longer. Skipping servicing can lead to poor heating, higher energy bills, or even unexpected breakdowns when you need warmth the most.
Did you know that not all heaters are the same? Whether you use an oil-filled heater, a fan heater, or an infrared heater, each type requires specific care to keep it running efficiently. Don’t worry if this sounds overwhelming, we’ve got you covered!
In this heater maintenance guide, we are revealing some DIY service tips tailored to each heater type. These hacks will help you ensure your heater delivers consistent warmth, save on energy bills, and avoid costly repairs down the road. So, before you switch on your heater this winter, take a little time to show it some care.
Why is room heater maintenance essential?
Regular maintenance is the key to keeping your room heater running efficiently, safely, and for a long time. Dust and dirt can clog its components, reducing its heating power and making it work harder, which increases energy consumption. Servicing helps the heater distribute heat evenly, ensuring your space stays warm and cosy.
More importantly, a well-maintained heater reduces the risk of overheating or electrical faults, making it safer to use. By taking the time to care for your heater, you not only save on energy bills but also prevent costly repairs or replacements in the future.
What are the signs that your heater needs immediate servicing?
If you are noticing any of the below signs in your heater, you need to get it repaired at the earliest:
Reduced heat output: If your heater isn’t warming up the room like it used to, it’s time to check for blockages or worn-out components.
Strange noises: Unusual sounds like buzzing, clicking, or rattling could indicate mechanical or electrical issues.
Burning smell: A burning or unusual odour may signal dust buildup or overheating, which needs immediate attention.
Uneven heating: Some parts of the room feel warm while others remain cold, pointing to inefficiency or internal blockages.
Higher energy bills: A sudden spike in your electricity usage could mean your heater is struggling to work efficiently.
Frequent shutdowns: If your heater keeps turning off unexpectedly, there could be an underlying issue requiring urgent servicing.
Understanding the types of room heaters
Since each type of heater requires a different type of servicing, let’s first understand the key differences between each:
| Oil-Filled Heaters | Fan Heaters | Infrared Heaters |
| Provides consistent and even heating | Heats rooms quickly | Emits infrared rays to heat objects directly |
| Energy-efficient and silent | Compact and portable | Ideal for smaller spaces |
| Takes longer to heat up but retains warmth longer | Prone to dust accumulation | Silent operation |
| Heavier and less portable | Can dry out air in the room | Energy-efficient for direct, localised heating |
| Suitable for larger rooms and long-term use | Noisy during operation | Limited to heating small areas |
| Requires more maintenance due to oil levels | Less energy-efficient compared to oil-filled heaters | Not effective for heating entire rooms |
Also read: What are the long-term effects of constant room heater usage?
Maintenance hacks for oil-filled heaters
Oil-filled heaters are known for their consistent warmth, but just like any other appliance, they need a little care to keep running smoothly. Here’s a simple step-by-step guide to help you maintain it.
1. Clean the dust and dirt
Over time, dust and dirt can build up on the oil-filled heater’s fins and body, reducing its efficiency. Use a vacuum cleaner with a brush attachment or a soft cloth to gently clean the surface. Don’t forget the hard-to-reach spots! Regular cleaning helps your heater work better and keeps the air cleaner in your room.
2. Check for oil leaks
One of the key things to look out for is oil leaks. If your heater starts leaking, it’s time to get it serviced. Always make sure the heater is standing upright and avoid tilting it, as this can cause the oil to leak. If you notice any oil stains, it’s a red flag!
3. Test the thermostat and switches
The thermostat controls how hot your heater gets, so it’s important to check it regularly. Make sure the thermostat is responding to temperature changes and that all the switches are working properly. If anything feels off, it’s worth getting checked by the professional.
4. Storing it during the off-season
When the winter ends, don’t just shove your heater in a corner and forget about it! Store it in a dry, cool place to avoid damage. Make sure it’s clean and unplugged before storing it away for the season.
Check out these efficient oil-filled radiators on Amazon
Also read: Room heater buying guide: A complete guide to help you beat the winter chill
Maintenance tips for fan heaters
Here’s a simple guide to help you maintain your fan heater, so it stays in top condition all winter long.
1. Clean the fan blades and vents
Dust and debris can clog the fan blades and vents, preventing your heater from working at its best. Use a soft brush or cloth to clean the fan blades gently. Be sure to clean the vents as well to allow proper airflow.
2. Remove dust from the motor and internal components
As dust accumulates inside your fan heater over time, especially in the motor and other internal components, use a vacuum cleaner with a nozzle attachment or compressed air to blow it out. This will prevent blockages and ensure the heater operates smoothly.
3. Test the thermostat and temperature settings
To make sure your heater is delivering the right temperature, check the thermostat and temperature settings. Test it by turning the heater on and adjusting the settings. If the temperature seems off or doesn’t match what’s set, it could mean the thermostat needs attention. It is advisable to call a professional for accurate checking.
4. Safety precautions
Fan heaters work by blowing warm air, so safety is essential. Always keep your heater away from water to avoid electrical hazards. Also, keep it clear of any flammable objects, like curtains or papers. These simple precautions can prevent accidents and keep your heater running safely.
Best fan heaters on Amazon
Maintenance hacks for infrared heaters
Follow these simple maintenance tips and your infrared heater will continue to provide effective, silent warmth when you need it most:
1. Clean the reflectors and infrared bulbs
Heat output gets reduced as the reflectors and infrared bulbs gather dust or dirt over time. To clean them, use a soft cloth or a microfiber duster to gently wipe the surface. Be careful not to damage the bulbs, as they can be delicate.
2. Inspect wires and connections
Always check the wires and connections for signs of wear, fraying, or any damage. If you spot any issues, it’s important to address them immediately. Damaged wiring can lead to safety risks, so never ignore them. If needed, consult a professional to fix any electrical issues.
3. Ensure proper positioning
For the best heat distribution, make sure your infrared heater is positioned properly. It should be placed in an open area without any obstructions, so the infrared rays can reach you directly. Avoid placing it near walls or corners, as this can affect the heater’s performance.
4. Handle and replace infrared bulbs safely
If your infrared bulb burns out, it’s important to replace it with the same type and wattage. Always turn off and unplug the heater before handling the bulb. Wear gloves to avoid touching the new bulb with bare hands, as oils from your skin can damage it. Follow the manufacturer’s instructions for safe replacement.
Explore the best infrared heaters on Amazon
Room heater servicing: DIY or call a professional?
When it comes to servicing your room heater, its important to know when to take matters into your own hands and when to call in an expert. Some basic maintenance tasks are easy to tackle on your own, like cleaning dust or checking the thermostat. However, there are times when professional help is necessary to ensure your heater’s safety and efficiency.
DIY heater maintenance
Simple tasks like cleaning the heater’s exterior, vacuuming out dust, or testing the thermostat can usually be done without professional help. These tasks not only keep your heater running smoothly but can also prevent small issues from becoming bigger problems.
When to call a professional for heater servicing
Certain signs indicate that it’s time to bring in an expert. If your heater is experiencing persistent heating issues (like no heat or uneven heating), or if you notice electrical faults such as sparking, strange smells, or frequent shutdowns, it’s best to leave the repairs to a trained technician. These issues could be signs of a serious underlying problem that requires specialised attention.
Also read: Best room heater to keep your room warm: Top 6 ISI approved models
Preventive room heater maintenance tips
- Avoid overloading your heater by using it within the manufacturer’s recommended limits.
- Ensure that air vents and filters are kept clear to maintain proper airflow.
- Check wires and connections for wear and tear to prevent safety hazards.
- Keep the heater away from flammable materials and water sources to ensure safe operation.
- Inspect the heater for any signs of wear or damage, especially before each season.
- Avoid placing the heater in damp or humid areas to prevent moisture-related issues.
- Use a surge protector to prevent electrical damage during power fluctuations.
- Always turn off the heater when not in use to avoid unnecessary wear and energy wastage.
Just like any other home appliance, heaters need attention to ensure they work at their best, especially during the cold winter months. Don’t wait for problems to arise! Inspect and service your heater today to keep it in top condition throughout the season. It only takes a few minutes but can make all the difference in having a warm and worry-free winter.
Similar articles for you
Room heaters: Top 10 models under ₹3000, no worries about cost
Best oil heater under 20000: Top 9 low maintenance and energy efficient heaters
Heater blower: Keep your home cosy and warm with premium and top-notch heaters
Best Bajaj room heaters: Unveil top 9 options for cosy comfort
How to maintain your room heater?
- How do I check for oil leaks in an oil-filled heater?
Look for visible stains or damp areas around the heater. If you suspect a leak, avoid using the heater and have it checked by a professional.
- Is it safe to use a fan heater in a bathroom?
No, fan heaters should not be used in damp areas like bathrooms due to the risk of electrical hazards. Always keep them in dry, well-ventilated spaces.
- What should I do if my infrared heater’s bulb burns out?
Turn off the heater, unplug it, and carefully replace the bulb following the manufacturer’s instructions. Always wear gloves to handle the new bulb.
- Can regular maintenance help reduce my energy bills?
Yes, by keeping your heater clean and well-maintained, it runs more efficiently, reducing energy consumption and lowering your utility bills.
Disclaimer: At Hindustan Times, we help you stay up-to-date with the latest trends and products. Hindustan Times has an affiliate partnership, so we may get a part of the revenue when you make a purchase. We shall not be liable for any claim under applicable laws, including but not limited to the Consumer Protection Act, 2019, with respect to the products. The products listed in this article are in no particular order of priority.